Speedyfit RTF makes it easy to order bespoke air conditioning systems that arrive Ready-to-Fit and with every component individually selected according to the chosen system size. Simply select the type and size of system required, how the external compressor will be mounted and the pipe run distance between the indoor and outdoor units.
By selecting a standard pipe set longer than required, customers can specify a shorter and more precise pipe set length at no extra charge by stating the required length when placing their order. Interconnecting power and signal cables are sized according to the pipe set length required with an additional 500mm spare to create a service loop. If you thought air conditioners were just for cooling then think again, because the Speedyfit High Wall series uses reverse-cycle technology with R32 refrigerant to produce low cost heating and cooling to perfectly maintain room temperatures all year round. Available in 4 sizes ranging from 9000btu's up to 240000btu's, each model comes complete with a stylish infrared remote handset and built-in WIFI to provide total control from any location.3.5 (1.37 - 4.5). 4.0 (1.06 - 4.9). Power Supply (Indoor unit powered by outdoor unit). 4.19 (0.5 - 7.2).
4.19 (0.5 - 6.4). Interconnecting Wiring (Power & Control Cable). Indoor Sound Pressure Level (Hi/Mi/Lo).6.35/9.52 (1/4" / 3/8"). Nominal Conditions: Cooling; indoor 27°C DB, 19°C WB, outdoor 35°C DB, 24°C WB. Nominal Conditions: Heating; indoor 20°C DB, outdoor 7°C DB, 6°C WB. UK Conditions: Summer: indoor 21°C DB, 15°C WB, outdoor 27°C DB. Sound Pressure is measured 1.0m below the air-outlet at Nominal Conditions. Speedyfit High Wall kits are delivered Ready-to-Fit with every component part selected and sized according to individual system requirements. Accessories are supplied complete with fixings in the quantities necessary to accommodate inter-connecting pipe run distances, cabling and drain hose lengths. Speedyfit full featured internal evaporation unit complete with infrared remote control and plug-in WIFI module for Smart control from any location. Diamond edge compressor unit pre-charged with cleaner and more efficient R32 refrigerant to service interconnecting pipe runs up to 5 metres, or up to 25 metres (Max) when topped up with additional refrigerant by a qualified F-Gas engineer.
When placing your order you will be presented with a choice of mounting systems for the external compressor. Wall mounted systems are supplied with a heavy duty adjustable wall bracket complete with wall fixings, anti-vibration washers, mounting nuts, bolts and a useful clip-in sprit level for accurate alignment.Ground mounted systems are supplied with a pair of 400mm heavy duty anti-vibration feet embedded with galvanized channel and supplied with 4 x 10mm channel nuts, washers and hexagonal bolts for securing the compressor. Speedyfit professional grade pre-assembled twin pipe set comprised of 1/4" (liquid) & 3/8" (Gas) copper tube, individually lagged with 13mm close cell insulation and terminated with forged brass flare nuts, single twist dust caps and insulated over-sleeves. When placing your order choose a pipe set that is slightly longer than required, then specify the length required as a "Buyers note" to have your pipe set tailor-made to match your project requirements. Speedyfit professional pipe sets are supplied Ready-to-fit in continuous lengths up to 25m.
This system includes a pre-assembled 1.5mm 5-core interconnecting power and signal cable, individually terminated with anti-vibration hook-blade connectors and heatshrink over-sleeves at both ends to provide double insulated identification using colour-coded cores. Interconnecting cables are supplied Ready-to-fit to match pipe set lengths with an additional 500mm spare for creating a service loop.
This system requires 2 condensate drain hoses. The first hose connects to the indoor unit to allow condensation build-up to flow freely outside via the pipe exit hole. The second hose connects underneath the compressor to allow condensation build-up to run freely to a nearby drain.RTF kits include a single 8m length of hose that can be cut according to each drain hose length requirement, supplied with 2 x thumb-tightening Jubilee clamps and a roll of PTFE tape for making water-tight connections. Stubby Wall Outlet & Bracing System. RTF kits include the Stubby external wall outlet system for creating a neat finish around the pipe exit hole, which comes complete with an appropriate number of bracing saddles for securing the connection pipes, cable and condensate hose between the Stubby unit and the external compressor.
The Speedyfit aircon isolation switch should be mounted close to the external compressor so power to the compressor and indoor unit can be switched off completely. This IP65 weatherproof unit comes pre-wired with a 2m length of 2.5mm SY cable fitted with anti-vibration hook blade connectors and heatshrink colour-coded over-sleeves at each end, with 5 x stainless steel P-clips for securing the cable to a wall. This unit unit is supplied Ready-to-Fit with an extra entry gland to accept the client-side mains supply cable.RTF kits are supplied complete with a system installation guide and user manual, with additional resources available from our download section. Pipe runs exceeding 5 metres (max 25m) will require extra R32 refrigerant The internal unit is electrically powered from the external compressor. Speedyfit RTF kits are supplied in 2 deliveries, the first is comprised of the main system packaged in 2 large boxes that may arrive on a pallet. Stubby Pipe Outlet & Bracing System. The item "Speedyfit HW12 R32 Split Air Conditioner 12000 btu Alexa Voice Control + WIFI" is in sale since Tuesday, April 9, 2019. This item is in the category "Home, Furniture & DIY\Heating, Cooling & Air\Air Conditioners\Ductless Mini Split Systems". The seller is "tradeshop-limited" and is located in Worcester. This item can be shipped to United Kingdom.